Reflector Fire Cooking Techniques
Reflector Fire Cooking
Bushcraft Cooking With Reflected Heat
A reflector fire is a simple and effective bushcraft cooking technique that uses a wall or reflective surface beside the fire to direct heat back towards the cooking area.
Instead of allowing much of the fire's radiant heat to escape, the reflector helps direct heat towards the food. A reflector can also act as a windbreak, helping to protect the fire and create a more controlled cooking area.
Reflector fires can be used for baking, roasting, panassing fish and general campfire cooking.
For Scouts, this is a great way to learn about fire management, radiant heat, natural materials and outdoor cooking.
What Is a Reflector Fire?
A reflector fire has three basic elements:
FIRE → REFLECTOR → FOOD
The reflector is positioned beside the fire so that radiant heat is directed towards the cooking area.
A reflector can be made from:
- Logs
- Suitable stones
- Metal
- A purpose-built reflector oven
- Other suitable fire-resistant materials
The reflector can also help protect the fire from wind.
Reflector Fire Cooking Techniques

Building a Reflector Fire
Building a reflector fire behind your cooking area bounces radiated heat back toward your food, which speeds up cooking and creates a more focused, directional heat zone.
Choose a Safe Location
Choose an open area suitable for a campfire and cooking.
The fire should be positioned well away from:
- Tree roots
- Trees
- Overhanging branches
- Dry grass
- Dry vegetation
- Tents
- Shelters
- Other combustible materials
Never build a fire underneath overhanging branches or where underground roots could allow fire to spread.

🐟 Panassing
Traditional Bushcraft Fish Cooking
Panassing is a traditional method of cooking this shows a whole fish beside an open fire, but could be done with rabit or chicken.
The fish is opened out and secured using green sticks, allowing it to be positioned beside the fire and cooked using radiant heat rather than being placed directly in the flames.
It is particularly suited to whole fish such as trout and other suitable fish.
Panassing makes a great Scouts Bushcraft activity because it combines:
- Fish preparation
- Green-stick construction
- Fire management
- Radiant-heat cooking
- Food safety
Preparing the Fish
Prepare the fish carefully and hygienically.
- Clean and gut the fish.
- Remove the head and tail if required.
- Open the fish out.
- Remove the backbone and unwanted bones where appropriate.
- Make suitable cuts or openings for the green-stick frame.
- Secure the fish open between suitable green sticks.
The aim is to hold the fish open and relatively flat, allowing the radiant heat to reach the flesh.
Making the Panassing Frame
Use suitable fresh green sticks.
The fish can be secured between two sticks or held in a simple split-stick arrangement.
The sticks should hold the fish securely without crushing the flesh.
Fresh green wood is preferable to dry dead wood because it contains moisture and is less likely to ignite immediately.
Only use suitable, clean, non-toxic wood.
Positioning the Fish
Place the panassing fish beside the fire.
The fish should be close enough to receive good radiant heat but not so close that it catches fire.
The fish should not be placed directly into the flames.
The reflector can be positioned behind the fire to direct additional radiant heat towards the fish.
Adjust the distance and angle as required during cooking.
Cooking the Fish
Cook the fish slowly using the radiant heat from the fire and hot embers.
The green-stick frame allows the fish to remain open and positioned towards the heat.
Turn or reposition the fish when necessary so that it cooks evenly.
Cooking time will depend on:
- Size of the fish
- Distance from the fire
- Fire temperature
- Wind conditions
- Position of the reflector
Do not rely on cooking time alone.
The fish should be thoroughly cooked before serving.
A food thermometer can be used to verify the internal temperature.
⚠️ Scout Safety
Whatever reflector is used, the fire itself remains the primary hazard. Current Scouts UK guidance says campfires should be planned and risk assessed, supervised by a competent adult, located on a suitable non-combustible surface, and have appropriate extinguishing equipment available.
For cooking specifically:
- Keep young people from reaching across the fire.
- Never reach over flames.
- Use suitable heat-resistant gloves.
- Keep hot cookware under control.
- Allow equipment to cool before moving it.
- Keep water/firefighting equipment immediately available.
- Consider wind direction and changing weather.
- Keep a clear safety boundary around the fire.
🏕️ For Scouts Bushcraft
I'd present the three systems as:
Log = Traditional
Learn to build it.
Stone = Thermal Mass
Learn how materials store heat.
Metal = Portable
Learn how to control reflected heat.
That gives you a good Scout cooking skills activity, rather than simply teaching one way of making a reflector fire.
- Bounces radiant heat: Infrared radiation from the fire strikes the wall and bounces forward into your living space.
- Blocks wind: The solid barrier stops cold air from sweeping across the fire and chilling your back.
- Manages smoke: Positioning the wall close to the back of the fire helps draft smoke upward instead of blowing it into your face or shelter
Other Links
Scouting Hyperlinks
Location: Essex